Image may not reflect selected options.


Elkay EZH2O In-Wall Bottle Filling Station, Filtered 8 GPH Stainless

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 37.48ms
  • bvseo-msg: HTTP status code of 404 was returned;
Product Description
Material Stainless Steel
Number of Stations 1
Features Antimicrobial, Filtered, Green Ticker™, Hands Free, Laminar Flow, Real Drain, Visual Filter Monitor
Power 115V/60Hz
Dimensions L: 19-3/4"
W: 3-1/2"
H: 40-13/16"
Bubbler Style No Bubbler
Mounting Option Wall Mount (Inwall Frame/Plate)
Chilling Capacity 8.0 GPH
Installation Location Indoor
Number of Stations Serving 1
Shipping Dimensions L: 28-1/4"
W: 57-15/16"
H: 44-1/2"
Approximate Shipping Weight (lbs) 80
Includes: Bottle Filler (LZWSM8C), Chiller (ECH8), Mounting Frame (MFWS100), Filter (EWF3000)
Made or Assembled USA built
Family Bottle Filler Only
ADA Compliance YES
Code Compliance Drinking Water ADA & ICC A117.1
Buy American Act
CAN/CSA C22.2 No. 120
NSF 42
NSF 53
NSF 61
NSF 372 (lead free)
UL 399
Special Note Coming soon: Elkay’s ezH2O is getting a new look. The model you receive may have an updated logo, different from what is shown here.
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 11.93ms
  • bvseo-msg: HTTP status code of 404 was returned;

What is the delivery time for this item?

Asked by: Nicky123
Hi Nicky, thank you for inquiring about Elkay’s LZWSM8K bottle filler. As you can imagine, these units are very popular, especially with the touchless bottle filler operation. The most accurate lead time information can be provided by reaching out to your local sales rep or contacting our Customer Care team. You can find your local sales office here: or contact our Customer Care team via email to or phone 1-800-476-4106.
Answered by: Elkay_Expert
Date published: 2020-10-14

what is the power rating in watts/va of this equipment? for electrical sizing ocpd and cable purposes.

Asked by: jpat
Thank you for your question on the LZWSM8K. Unfortunately, Elkay cannot specify this. You will need to consult local building & electrical codes to wire the unit correctly. The remote chiller for this unit is rated at 370 watts per the spec sheet. I have included the link to the spec sheet for the chiller below.
Answered by: Elkay_Expert
Date published: 2020-09-02

I'm looking to replace several of our dual ELKAY fountains with a dual fountain with touch less bottle filler. Our existing Eunits have "remote, in-ceiling" refrigeration units. Can I get a dual fountain with bottler fill WITHOUT "built in" refrigeration?

Asked by: Joe C
Thank you for your question on the LZWSDPK. Yes, you can keep your in-ceiling chillers (refrigeration units) and order new non-frigerated bottle filling station and fountain combo units to replace your current fountain only models. Just make sure that the new units are installed within 15 ft of your existing in-ceiling chillers.
Answered by: Elkay_Expert
Date published: 2020-08-18

Does the water come out cold?

Asked by: katie2
Thank you for your question on the LZWSM8K. This model chills 8.0 GPH (gallons per hour) of 50° F drinking water, based on 80° F inlet water and 90° F ambient.
Answered by: Elkay_Expert
Date published: 2020-08-17

Hi, I'm looking at installing an ELKAY LZWS(M)DK water dispenser and just needing to figure out the installation. It shows on your website that the unit is 1037mm tall x 502mm wide. What is standard height that the unit gets installed at? i.e. is the

Asked by: David Agnew
Thank you for your question on the LZWSM8K. The installation height will be based off of the mounting frame. The rough-in height dimension from the finished floor is 114 mm (4.5”). The overall height will end up at about 1130 mm (44.5”) from the finished floor. I've also included the link below to the installation instructions for the mounting frame for this model for reference.
Answered by: Elkay_Expert
Date published: 2020-07-31

Is there a conversion kit to change from non-refrigerated to refrigerated.

Asked by: jmadore
Thank you for your question on the LZWSDK. There is no conversion to my knowledge but we can get the list of parts required to add a chiller. It will take a tall louvered panel (item # 28925C), shelf hardware (2 each of item #101567443730), shelf (item # 27638C) & the chiller (item # ECH8P). Please contact our friendly Customer Care team with these model numbers and they will be able to assist you further. They can be reached at: 800-476-4106 or Email:
Answered by: Elkay_Expert
Date published: 2020-07-31

Model LZWSGRN8K. Existing wall depth is 6". Can the chiller be remote, above the ceiling? Like other Elkay EWC's? If this model can not, is there a similar model that can have a remote chiller? Thank you, R. Trevino Sr. Plumbing Designer

Asked by: Ricardo59
Thank you for your question on the LZWSGRN8K. Yes, the chiller can be installed remotely, even in a ceiling. You can just follow the instructions that come with the chiller (which I have also included the link to below) to install it, but just make sure that the chiller is installed within 15 ft of the bottle filling station.
Answered by: Elkay_Expert
Date published: 2020-07-06

Is there something similar to this, but for outdoor use: EZWSMDK Elkay EZH2O In-Wall Bottle Filling Station, Non-Filtered Non-Refrigerated Stainless

Asked by: Hans
Hello Hans - We would love to help you find the perfect unit! Please reach out to our customer care team for assistance. They can be reached at Phone: 800-476-4106 or Email: Thank you for your question!
Answered by: ElkayExpert
Date published: 2020-05-28
  • y_2020, m_10, d_19, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_21
  • loc_en_US, sid_LZWSM8K, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_elkay
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 80.77ms