Image may not reflect selected options.
Elkay ezH2O In-Wall Bottle Filling Station, Filtered Refrigerated Stainless
Elkay ezH2O In-Wall Bottle Filling Station, Filtered Refrigerated Stainless is rated out of 5 by 2.
|Number of Stations||1|
|Features||Antimicrobial, Filtered, Green Ticker, Hands Free, Laminar Flow, Real Drain, Visual Filter Monitor|
|Bubbler Style||No Bubbler|
|Mounting Option||Wall Mount (Inwall Frame/Plate)|
|Chilling Capacity||8.0 GPH|
|Number of Stations Serving||1|
|Shipping Dimensions||L: 28-1/4"
|Approximate Shipping Weight (lbs)||66 lbs.|
|Includes:||Bottle Filler (LZWSM8PC), Chiller (ECH8), Filter (EWF3000)|
|Made or Assembled USA||built|
|Code Compliance Drinking Water||ADA & ICC A117.1
Buy American Act
CAN/CSA C22.2 No. 120
NSF 372 (lead free)
|Special Note||Requires mounting frame MFWS100 which is ordered seperately for early installation. To be paired with SwirlFlo Fountains.|
Rated 5 out of 5 by Automation Technician from Fantastic Unit When Working We currently have 6 of these in our 92K sq. ft. office building and as the person who takes care of these I can tell you that when they are working they are a great asset. After 5 years of being installed we are consistently having problems with 2 of them turning off. After replacing every single electrical component including the dedicated outlets that these are plugged into we are still having problems. The only fix we have found is to unplug them and plug them back in. Then they work great again for a few weeks.
Date published: 2021-05-17
Rated 1 out of 5 by JoeFields from This isn't going to fit in your wall Was so excited to purchase this and get it installed until... the -tiny- fine print lays out the fact that you need a minimum depth of 16" in your wall for installation. Unless you're wall has been specifically built for this, you do NOT have that depth. Skip these and find something else; they won't work for you
Date published: 2021-03-18
Does this unit have a pump the it can pump to a near by drain?
Thank you for your question on the Elkay LZWSM8K ezH2O In-Wall Bottle Filling Station with Mounting Frame. No, this model does not have a pump that pumps the wastewater to a drain.
Date published: 2021-08-17
Is the Elkay ezH20 unit suitable for an aquatic centre environment?
Thank you for your question on the Elkay LZWSDPK ezH2O In-Wall Bottle Filling Station. This model is for indoor use only and is made of 300 series stainless steel.
Date published: 2021-07-07
In order to be ADA compliant, does the top of the unit need to be 40-13/16" from the ground?
Thank you for your question on the Elkay LZWSM8K ezH2O In-Wall Bottle Filling Station with Mounting Frame. No, the 40-13/16” is simply the height of the product. There is no specific height requirement at which the LZWSM8K must be installed. The only height limitation is that a person can’t be required to reach higher than 48” off the ground in order to activate the sensor.
Date published: 2021-07-02
Does this unit stand alone or must it be paired with another water fountain?
Thank you for your question on the Elkay LZWS8PK EZH2O In-Wall Bottle Filling Station. This is a stand alone bottle filling station.
Date published: 2021-04-23
We have one in our building, what size hex does it take to remove the cover on the drain to clean it.
Thank you for your question on the Elkay LZWSM8K EZH2O In-Wall Bottle Filling Station. You will need a 1/8" Allen wrench.
Date published: 2021-04-15
For the LZWSDK bottle filler, is the mounting frame MFWS100 required or recommended?
Thank you for your question on the Elkay LZWSDK EZH2O In-Wall Bottle Filling Station. A mounting frame is required with the MFWS100 being the recommended mounting frame.
Date published: 2021-04-15
I see another question with answer that chiller should supply water at 50 degrees F. Recently installed 3 units, dispensing water at 60 degrees F. Is there an adjustment to the chiller temperature?
Thank you for your question on the Elkay EZWS8K EZH2O In-Wall Bottle Filling Station. There is a screw you can turn to adjust the temperature on the chiller. I have included the link to the installation instructions, which shows the location of the temperature adjustment and has a paragraph on Temperature Control. https://www.elkayfiles.com/care-cleaning-install-warranty-sheets/1000003097.pdf
Date published: 2021-04-15
We have an Elkay EZ H20 bottle filling station. The message reads clean filling area. We tried flushing the drain and wiped everything down with a mild soap and rinsed. What needs to be done?
Thank you for your question on the Elkay LZWSM8K EZH2O In-Wall Bottle Filling Station. This could be a wet or dirty optical sensor that would just need to be dried or could be cleaned with white vinegar if there is a buildup on it. If that does not resolve the problem, it could be a scratched lens or an issue with the IR board. If cleaning the lens does not help, you can also contact our Tech Services and they will be happy to walk you through the other solutions. They can be reached at: 800-260-6640 and select Option 3. Please call while you are at the unit in question as our Tech Services representative may have questions in order to help you properly.
Date published: 2021-01-15