Image may not reflect selected options.
Elkay Cooler Wall Mount ADA Filtered Refrigerated Light Gray Granite
Elkay Cooler Wall Mount ADA Filtered 8 GPH Light Gray Granite is rated out of 5 by 7.
|Number of Stations||1|
|Features||Filtered, Glass Filler Prepped|
|Bubbler Style||Flexi-Guard ® Safety Bubbler|
|Mounting Option||Wall Mount (On Wall)|
|Chilling Capacity||8.0 GPH|
|Number of Stations Serving||1|
|Shipping Dimensions||L: 20-1/2"
|Approximate Shipping Weight (lbs)||54 lbs.|
|Includes:||Water Cooler, Filter|
|Made or Assembled USA||built|
|Code Compliance Drinking Water||ADA & ICC A117.1
ASME A112.19.3/CSA B45.4
Buy American Act
CAN/CSA C22.2 No. 120
NSF 372 (lead free)
|Special Note||Glass filler ordered separately.|
Rated 5 out of 5 by CAREY from Nailed it As a wholesaler I can honestly say this is a great product. Elkay support is great in the case of a problem. The main issue I see with this unit is most people install them outdoors. These are not meant to be installed outside. This can cause over heating issues with the compressor. Elkay does have a model that is designed to weather the elements!
Date published: 2019-07-31
Rated 5 out of 5 by Go Knights from Quality product I use only Elkay water coolers now. I tried using competitor's products and have had nothing but let downs.
Date published: 2018-09-01
Rated 5 out of 5 by Kitten11 from Wonderful Quality When I was in elementary school, we used these water fountains and there were no problems with them.
Date published: 2019-10-18
Rated 1 out of 5 by Sandra of Hood River from Disappointed-water never gets cold I just replaced the relay overload (as advised by tech support) and there's no difference. The water comes out hot and then warm and then maybe room temperature. The compressor stays on all the time (still), is super hot and any water cooling that might be happening is being cancelled out by the heat that the mechanism gives off. Very poor design!
Date published: 2018-08-07
Rated 1 out of 5 by yettingman from the Elkay LMABF8 is so much better Although this accomplishes its job of giving water, I would say the LMABF8 is better. This is good for giving water and quenching thirst, but the look of it isn't as good as the LMABF8. It is cheaper so if you want to save 200 dollars go for it, but otherwise I would spend the extra 200 for the much better LMABF8.
Date published: 2018-12-07
Rated 2 out of 5 by Stretch2a from Poor water valve Have had the unit about 2 years and after replacing the water valve, nothing but trouble. Valve failure with the slighest contaminits in the city water system. Last valve failed with a water filter in the water line.
Date published: 2019-05-01
Rated 5 out of 5 by pribz from Great product Happy with this product. It works well and was easy to install.
Date published: 2020-12-01
Hello I have a model EZFS8_1C fountain. Is there a bottle filler retrofit kit that will fit it? The EZWSRK doesn't have a full list of compatible fountains that I could find
Thank you for your question on the Elkay EZS8L Cooler Wall Mount ADA. Yes, the Elkay EZWSRK EZH2O RetroFit Bottle Filling Station Kit will work with your EZFS8 model.
Date published: 2021-05-03
Will the #MLP200 in wall carrier mounting system work to mount a #LZS8LF and a #LZS8WSLP side by side as a high low?
Thank you for your question on the Elkay LZS8LF Wall Mount ADA Cooler. We would recommend the Elkay LZSTL8WSLP Enhanced EZH2O Bottle Filling Station & Versatile Bi-Level ADA Cooler and the MLP200 In Wall Carrier for bi-level models versus using two separate units.
Date published: 2021-02-11
I have an Elkay EBFATL8-1C and is there a bottle filler kit for this model? Thanks John
Thank you for your question on the EZSTL8SC. Unfortunately, there is not a retrofit bottle filling station available for the EBF models due to their age and design.
Date published: 2020-11-23
We have the EZSTL8LC with EZFSTL8 1F also listed on the sticker along with #150912007. We are looking for a bottle filler to retrofit if possible.
Thank you for your question on the EZSTL8LC. The unit you currently have does have the capability to be retrofitted with a bottle filler. It does have two different options to add either a retrofit bottle filler that is non-filter or to retrofit it with a filtered bottle filler. The non-filtered retrofit option model number is EZWSRK and the filter retrofit option model number is LZWSRK. Both retrofit models are available on Elkay.com for you to review and download any specifications needed.
Date published: 2020-06-19
Where might I find a parts break-down for this model? Need to order parts.
Hello PlumbersHelper - Please contact our friendly customer care team for assistance. They can be reached at Phone: 800-476-4106 or Email: CustCare@Elkay.com. Thank you for your question!
Date published: 2019-11-20
How come I can not find any info on model EDFP214FP_B with serial 150729559. I need a regulator.
Hello Brian Jr - We would love to help you with this. Please contact our friendly customer care team at Phone: 800-476-4106 or Email: CustCare@Elkay.com. Thank you for your question!
Date published: 2019-10-14
Am I able to add a filter to this system at a later time. If so, what is the filter product that I shall use?
Hello John124 - Yes, you can add filter EWF172. Thank you for your question!
Date published: 2020-12-15
What the power cord lenght?
Hello Pascal - The power cord is 44". Thank you for your question!
Date published: 2019-09-20