Image may not reflect selected options.
Elkay EZH2O Bottle Filling Station with Single ADA Cooler, Filtered Refrigerated Light Gray
Elkay EZH2O Bottle Filling Station with Single ADA Cooler, Filtered 8 GPH Light Gray is rated out of 5 by 1.
|Number of Stations||1|
|Features||Antimicrobial, Filtered, Green Ticker, Hands Free, Laminar Flow, Mechanically Activated, Real Drain, Visual Filter Monitor|
|Bubbler Style||Flexi-Guard ® Safety Bubbler|
|Mounting Option||Wall Mount (On Wall)|
|Chilling Capacity||8.0 GPH|
|Number of Stations Serving||1|
|Shipping Dimensions||L: 24"
|Approximate Shipping Weight (lbs)||94 lbs.|
|Includes:||Water Cooler (LMABF8WSL), Bottle Filler (LZWSR), Filter|
|Made or Assembled USA||built|
|Code Compliance Drinking Water||ADA & ICC A117.1
ASME A112.19.3/CSA B45.4
Buy American Act
CAN/CSA C22.2 No. 120
NSF 372 (lead free)
Rated 1 out of 5 by Bob in Chicago Heights from Operation is fine but electronics are poor I purchased 1 of these for the break room of my business to replace a dedicated water cooler (I already had the drinking fountain) and had it installed in April 2019. I am now purchasing PN 98543C, which is all of the electronics for the unit which costs almost 1/2 of what the bottle filler costs in the first place. My plumber says the control board is getting power, but the not sending power to the sensor or releasing water, and the control board is not available individually, it is part of the complete electronics package. I had not yet reached 10,000 bottles saved on the counter on the unit. It was an unfortunate time for it to die as right now I am not supposed to have the fountain portion accessible due to COVID. If I were to do it again, I would get a bar faucet and plumb it into the chilled line of the fountain, like I did on my fully stainless fountains that Elkay did not make bottle fillers for (photo attached). I would lose the bragging rights of how many bottles I've saved and no-contact, but gain reliability. Between service calls, installation, and parts, I did not come out ahead compared to what a water service was costing me, nor do I have the convenience of disposable bottles.
Date published: 2020-08-25
I am doing a school project and looking to see how much it would cost to have 2 of the LMABFDWSLK installed in seperate locations and one LK4405BF in another location. About how much would that cost
Thank you for your question on the Elkay LMABFDWSLK EZH2O Bottle Filling Station with Single ADA Cooler. There a lot of factors that can change the cost of the installation, like a new install versus replacing a unit, to where we can't provide an average cost. It could range anywhere from $700 if you're just swapping out similar units up to $1300 if it's replacing a non-Elkay model and requires rework. However, it could go as high as $3000 to $4000 if it's replacing an old porcelain fountain that has no electrical. Please contact our Installation Services team and with some additional information, they will be able to help you further on getting an estimate. They can be reached at: 800-952-8064.
Date published: 2020-12-28
Is this model compatible with the EZFSTL8 1D?
Thank you for your question on the Elkay EMABFWS-RF. You would actually want to use the LZWSRK retrofit bottle filling stations for your EZF model number.
Date published: 2020-12-16
Can the units be switched left to right, so the lower ADA unit is on the left side?
Thank you for your question on the EMABFTL8WSLK. The unit you're inquiring about is not offered as a standard model number but it can be ordered as a custom through firstname.lastname@example.org
Date published: 2020-10-28
We are a school retrofitting drinking fountains to water fillers. Our existing fountains are EMAB-FTLD-D-C. Will this retrofit model work or do we need another model?
Thank you for your question on the EMABFWS-RF. Yes, this model will work with your current fountains.
Date published: 2020-10-06
will this unit work with an EMABFTL8_1D?
Thank you for your question on the EMABFWS-RF. Yes, this model will work with your current cooler.
Date published: 2020-10-01
Hello, I recently bought the Elkay LZS8WSLP Filtered Enhanced EZH2O Bottle Filling Station. We changed the filter but the light is flashing red and I do not know how I can reset it because it is the newer model. How can we rest the filter status?
Thank you for your question on the LZS8WSLP. There is no reset button on this model as it should reset once the filter is replaced. Please check that the filter is installed with the label facing out. If after that check the light is still blinking, next check the wiring harness that connects to the NFC board. The board is located near the filter head. If that is connected, there could be an issue with one of the wire harnesses. Please contact our Tech Services and they will be happy to help. They can be reached at: 800-260-6640 and select Option 3. Please call while you are at the unit in question as our Tech Services representative may have questions in order to help you properly.
Date published: 2020-10-07
we have elkay drinking fountains and want to change them to fountains with bottle fillers, are they easy to change as far as plumbing locations ?
Thank you for your question on the EMABF8WSSK. Without knowing your current models, we're unable to answer on the installation of new units. Please contact our Tech Services with our model numbers and they will be happy to assist you further. They can be reached at: 800-260-6640 and select Option 3.
Date published: 2020-09-10
can this unit fill cupps (4-10oz) instead of bottles?
Thank you for your question on the LMABFWS-RF. Our bottle filling stations are not limited to just filling water bottles. You can use them to fill any of your favorite cups, mugs, glasses, etc. However, depending on the size of your container, you may have to hold it in front of the sensor while it dispenses water versus being able to set it down to fill.
Date published: 2020-09-03