Image may not reflect selected options.
Elkay EZH2O In-Wall Bottle Filling Station, Non-Filtered 8 GPH Stainless
|Number of Stations||1|
|Features||Antimicrobial, Green Ticker, Hands Free, Laminar Flow, Real Drain|
|Bubbler Style||No Bubbler|
|Mounting Option||Wall Mount (Inwall Frame/Plate)|
|Chilling Capacity||8.0 GPH|
|Number of Stations Serving||1|
|Shipping Dimensions||L: 28-1/4"
|Approximate Shipping Weight (lbs)||77|
|Includes:||Bottle Filler (EZWSM8PC), Mounting Frame (MFWS100), Chiller (ECH8)|
|Made or Assembled USA||built|
|Family||Bottle Filler Only|
|Code Compliance Drinking Water||ADA & ICC A117.1
Buy American Act
CAN/CSA C22.2 No. 120
NSF 372 (lead free)
|Special Note||To be paired with SwirlFlo fountains. Model received may have an updated logo, different from what's shown here.|
Is there any difference between the below model #'s? Model LZWSM8K and Model LZWSM8PK
Thank you for your question on the LZWSM8PK. The LZWSM8PK is the stand-alone bottle filler. The lower louvered panel is shorter than the other unit. The LZWSM8K is supplied with bilevel architectural fountains (LZWS-SS28K). The lower louvered panel has a different height to meet the louvered panel on the refrigerated fountains.
Date published: 2020-10-23
Hello, the stainless steel drain grate and the plastic drain basin for our filler have been damaged. Is it possible to purchase replacements? If so, what are the PNs?
Thank you for your question on the LZWSM8PK. You will need to order the below parts, which will include a replacement alcove as it will more than likely be damaged in the removal of the damaged grate and basin. Please contact our friendly Customer Care team directly and they will be able to assist you further in ordering the replacement parts needed. They can be reached at: 800-476-4106 or Email: CustCare@Elkay.com. 1 1000002587 Drain tray 1 0000000033 Drain cover kit 6 1000003493 Pal nuts 1 1000005513 Alcove kit
Date published: 2020-10-19
What is the delivery time for this item?
Hi Nicky, thank you for inquiring about Elkay’s LZWSM8K bottle filler. As you can imagine, these units are very popular, especially with the touchless bottle filler operation. The most accurate lead time information can be provided by reaching out to your local sales rep or contacting our Customer Care team. You can find your local sales office here: https://applications.elkay.com/sales-rep-locator or contact our Customer Care team via email to firstname.lastname@example.org or phone 1-800-476-4106.
Date published: 2020-10-14
what is the power rating in watts/va of this equipment? for electrical sizing ocpd and cable purposes.
Thank you for your question on the LZWSM8K. Unfortunately, Elkay cannot specify this. You will need to consult local building & electrical codes to wire the unit correctly. The remote chiller for this unit is rated at 370 watts per the spec sheet. I have included the link to the spec sheet for the chiller below. http://www.elkayfiles.com/spec-sheets/ech8_spec.pdf
Date published: 2020-09-02
I'm looking to replace several of our dual ELKAY fountains with a dual fountain with touch less bottle filler. Our existing Eunits have "remote, in-ceiling" refrigeration units. Can I get a dual fountain with bottler fill WITHOUT "built in" refrigeration?
Thank you for your question on the LZWSDPK. Yes, you can keep your in-ceiling chillers (refrigeration units) and order new non-frigerated bottle filling station and fountain combo units to replace your current fountain only models. Just make sure that the new units are installed within 15 ft of your existing in-ceiling chillers.
Date published: 2020-08-18
Does the water come out cold?
Thank you for your question on the LZWSM8K. This model chills 8.0 GPH (gallons per hour) of 50° F drinking water, based on 80° F inlet water and 90° F ambient.
Date published: 2020-08-17
Hi, I'm looking at installing an ELKAY LZWS(M)DK water dispenser and just needing to figure out the installation. It shows on your website that the unit is 1037mm tall x 502mm wide. What is standard height that the unit gets installed at? i.e. is the
Thank you for your question on the LZWSM8K. The installation height will be based off of the mounting frame. The rough-in height dimension from the finished floor is 114 mm (4.5”). The overall height will end up at about 1130 mm (44.5”) from the finished floor. I've also included the link below to the installation instructions for the mounting frame for this model for reference. http://www.elkayfiles.com/care-cleaning-install-warranty-sheets/98560c.pdf
Date published: 2020-07-31
Is there a conversion kit to change from non-refrigerated to refrigerated.
Thank you for your question on the LZWSDK. There is no conversion to my knowledge but we can get the list of parts required to add a chiller. It will take a tall louvered panel (item # 28925C), shelf hardware (2 each of item #101567443730), shelf (item # 27638C) & the chiller (item # ECH8P). Please contact our friendly Customer Care team with these model numbers and they will be able to assist you further. They can be reached at: 800-476-4106 or Email: CustCare@Elkay.com.
Date published: 2020-07-31