Image may not reflect selected options.
Elkay EZH2O In-Wall Bottle Filling Station, Non-Filtered Refrigerated Stainless
Elkay EZH2O In-Wall Bottle Filling Station, Non-Filtered 8 GPH Stainless is rated out of 5 by 1.
|Number of Stations||1|
|Features||Antimicrobial, Green Ticker, Hands Free, Laminar Flow, Real Drain|
|Bubbler Style||No Bubbler|
|Mounting Option||Wall Mount (Inwall Frame/Plate)|
|Chilling Capacity||8.0 GPH|
|Number of Stations Serving||1|
|Shipping Dimensions||L: 28-1/4"
|Approximate Shipping Weight (lbs)||63 lbs.|
|Includes:||Bottle Filler (EZWSM8C), Chiller (ECH8)|
|Made or Assembled USA||built|
|Family||Bottle Filler Only|
|Code Compliance Drinking Water||ADA & ICC A117.1
Buy American Act
CAN/CSA C22.2 No. 120
NSF 372 (lead free)
|Special Note||Requires mounting frame MFWS100 which is ordered seperately for early installation.|
Rated 1 out of 5 by JoeFields from This isn't going to fit in your wall Was so excited to purchase this and get it installed until... the -tiny- fine print lays out the fact that you need a minimum depth of 16" in your wall for installation. Unless you're wall has been specifically built for this, you do NOT have that depth. Skip these and find something else; they won't work for you
Date published: 2021-03-18
We have one in our building, what size hex does it take to remove the cover on the drain to clean it.
Thank you for your question on the Elkay LZWSM8K EZH2O In-Wall Bottle Filling Station. You will need a 1/8" Allen wrench.
Date published: 2021-03-24
For the LZWSDK bottle filler, is the mounting frame MFWS100 required or recommended?
Thank you for your question on the Elkay LZWSDK EZH2O In-Wall Bottle Filling Station. A mounting frame is required with the MFWS100 being the recommended mounting frame.
Date published: 2021-03-04
I see another question with answer that chiller should supply water at 50 degrees F. Recently installed 3 units, dispensing water at 60 degrees F. Is there an adjustment to the chiller temperature?
Thank you for your question on the Elkay EZWS8K EZH2O In-Wall Bottle Filling Station. There is a screw you can turn to adjust the temperature on the chiller. I have included the link to the installation instructions, which shows the location of the temperature adjustment and has a paragraph on Temperature Control. https://www.elkayfiles.com/care-cleaning-install-warranty-sheets/1000003097.pdf
Date published: 2021-02-03
We have an Elkay EZ H20 bottle filling station. The message reads clean filling area. We tried flushing the drain and wiped everything down with a mild soap and rinsed. What needs to be done?
Thank you for your question on the Elkay LZWSM8K EZH2O In-Wall Bottle Filling Station. This could be a wet or dirty optical sensor that would just need to be dried or could be cleaned with white vinegar if there is a buildup on it. If that does not resolve the problem, it could be a scratched lens or an issue with the IR board. If cleaning the lens does not help, you can also contact our Tech Services and they will be happy to walk you through the other solutions. They can be reached at: 800-260-6640 and select Option 3. Please call while you are at the unit in question as our Tech Services representative may have questions in order to help you properly.
Date published: 2021-01-15
We have a LZWSM8K installed.I noticed that it stops at around 1 liter every time the sensor is triggered. Is it possible to set that to 1/2 liter (so that it stops automatically with smaller water bottles)? Is the amount released based on volume or time?
Thank you for your question on the Elkay LZWSM8K EZH2O In-Wall Bottle Filling Station. It is based on time. The unit is programmed to run for 20 seconds and is hard programmed so it cannot be changed.
Date published: 2020-12-14
do you guys have a cad file of this item?
Thank you for your question on the EZWSM8K. We have the front, top, and side CAD files and the BIM files available on the product page under the Downloads tab.
Date published: 2020-11-19
Hi Is there a filtered option from this model?
Thank you for your question on the EZWSMDK. Yes, the LZWSMDK is the filtered version of this model. https://www.elkay.com/products/lzwsmdk.html
Date published: 2020-11-17
We have an Elkay EZH2O In-Wall Bottle Filling Station and changed the filter on it yesterday. We pressed the reset button, but the red light indicating that the filter needs changing did not revert to green. Can you help us?
Thank you for your question on the LZWSM8K. I have included a link to our Help Center article on replacing a filter which also includes resetting the filter status. You can also contact our Tech Services for further assistance. They can be reached at: 800-260-6640 and select Option 3. Please call while you are at the unit in question as our Tech Services representative may have questions in order to help you properly. https://helpcenter.elkay.com/hc/en-us/articles/360002271933-How-to-Replace-an-Elkay-ezH2O-Water-Filter
Date published: 2020-11-04