Image may not reflect selected options.
Elkay ezH2O Bottle Filling Station with Mechanically Activated, Bi-Level ADA Cooler Non-Filtered Refrigerated Stainless
Elkay ezH2O Bottle Filling Station with Mechanically Activated, Bi-Level ADA Cooler Non-Filtered Refrigerated Stainless is rated out of 5 by 1.
|Number of Stations||2|
|Features||Antimicrobial, Green Ticker, Hands Free, Laminar Flow, Mechanically Activated, Real Drain|
|Bubbler Style||Flexi-Guard ® Safety Bubbler|
|Mounting Option||Wall Mount (On Wall)|
|Chilling Capacity||8.0 GPH|
|Number of Stations Serving||2|
|Shipping Dimensions||L: 24"
|Approximate Shipping Weight (lbs)||101 lbs.|
|Includes:||Water Cooler (EMABFTL8WSSC), Bottle Filler (EZWSR)|
|Made or Assembled USA||built|
|Code Compliance Drinking Water||ADA & ICC A117.1
ASME A112.19.3/CSA B45.4
Buy American Act
CAN/CSA C22.2 No. 120
NSF 372 (lead free)
Rated 1 out of 5 by Bob in Chicago Heights from Operation is fine but electronics are poor I purchased 1 of these for the break room of my business to replace a dedicated water cooler (I already had the drinking fountain) and had it installed in April 2019. I am now purchasing PN 98543C, which is all of the electronics for the unit which costs almost 1/2 of what the bottle filler costs in the first place. My plumber says the control board is getting power, but the not sending power to the sensor or releasing water, and the control board is not available individually, it is part of the complete electronics package. I had not yet reached 10,000 bottles saved on the counter on the unit. It was an unfortunate time for it to die as right now I am not supposed to have the fountain portion accessible due to COVID. If I were to do it again, I would get a bar faucet and plumb it into the chilled line of the fountain, like I did on my fully stainless fountains that Elkay did not make bottle fillers for (photo attached). I would lose the bragging rights of how many bottles I've saved and no-contact, but gain reliability. Between service calls, installation, and parts, I did not come out ahead compared to what a water service was costing me, nor do I have the convenience of disposable bottles.
Date published: 2020-08-25
will this retrofit fit my drinking fountain? Elkay brand water fountain model # VRC-1C Serial # 190813701 part# VRC8S
Thank you for your question on the Elkay EMABFWS-RF ezH2O RetroFit Bottle Filling Station Kit for EMAB Family. Unfortunately, we do not offer a retrofit option in our stand product lines for vandal-resistant products.
Date published: 2021-08-04
We just installed the EZH2O at work and want to turn the water temperature down. How is this done?
Thank you for your question on the Elkay EMABF8WSSK ezH2O Bottle Filling Station with Mechanically Activated Single ADA Cooler. The cold control is located in the water cooler portion behind the lower front panel. The cold control adjustment screw needs to be turned all the way clockwise.
Date published: 2021-07-19
Would this be easy to replace the existing fountains we have in our schools
Thank you for your question on the Elkay EMABF8WSLK EZH2O Bottle Filling Station with Single ADA Cooler. It would depend on what your current models are that you're trying to replace. Please contact our friendly Customer Care team and they will be able to assist you further. They can be reached at: 800-476-4106 or Email: CustCare@Elkay.com.
Date published: 2021-04-01
Is this retro fit compatible with a Acorn Aqua model A111408F? Thanks
Thank you for your question on the Elkay EMABFWS-RF EZH2O RetroFit Bottle Filling Station Kit. Unfortunately, Elkay Retrofit Bottle Filling Station models are only compatible with Elkay cooler and fountains.
Date published: 2021-02-12
What is the minimum plumbing chase require to install?
Thank you for your question on the Elkay EMABFTLDDWSSK EZH2O Bottle Filling Station with Bi-Level ADA Cooler. There shouldn’t need to be a chase behind the wall of the unit listed. The plumbing will fit within a standard 2x4 framed / drywall clad wall. I have included a link below to our spec sheet and our installation instructions that both will show the rough-in requirements. https://www.elkayfiles.com/spec-sheets/emabftlddwssk_spec.pdf https://www.elkayfiles.com/care-cleaning-install-warranty-sheets/1000001718.pdf
Date published: 2021-02-06
Will this bottle filling station retrofit kit work with an Elkay drinking fountain model EZFSTL8_1E? If not, do you have a retrofit option? Thanks.
Thank you for your question on the Elkay EMABFWS-RF EZH2O RetroFit Bottle Filling Station Kit. You would actually want to use the Elkay LZWSRK EZH2O RetroFit Bottle Filling Station Kit for the EZFSTL8_1E model.
Date published: 2021-01-29
What is the life expectancy on one of these units?
Thank you for your question on the Elkay EMABF8WSLK EZH2O Bottle Filling Station with Single ADA Cooler. The life expectancy is going to depend on usage, installation environment, and how the unit is maintained. We approximate that at 7 years but keep in mind that based on the above it can be much shorter or longer.
Date published: 2021-03-02
I am doing a school project and looking to see how much it would cost to have 2 of the LMABFDWSLK installed in seperate locations and one LK4405BF in another location. About how much would that cost
Thank you for your question on the Elkay LMABFDWSLK EZH2O Bottle Filling Station with Single ADA Cooler. There a lot of factors that can change the cost of the installation, like a new install versus replacing a unit, to where we can't provide an average cost. It could range anywhere from $700 if you're just swapping out similar units up to $1300 if it's replacing a non-Elkay model and requires rework. However, it could go as high as $3000 to $4000 if it's replacing an old porcelain fountain that has no electrical. Please contact our Installation Services team and with some additional information, they will be able to help you further on getting an estimate. They can be reached at: 800-952-8064.
Date published: 2020-12-28