Image may not reflect selected options.

EMABF8WSSK

Elkay EZH2O Bottle Filling Station with Single ADA Cooler, Non-Filtered 8 GPH Stainless

$1,749.00
Elkay EZH2O Bottle Filling Station with Single ADA Cooler, Non-Filtered 8 GPH Stainless is rated 1.0 out of 5 by 1.
  • y_2020, m_9, d_24, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_EMABF8WSSK, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_elkay
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 69.03ms
  • REVIEWS, PRODUCT
Product Description
N/A
Material Stainless Steel
Number of Stations 1
Features Antimicrobial, Green Ticker™, Hands Free, Laminar Flow, Mechanically Activated, Real Drain
Power 115V/60Hz
Dimensions L: 17.875
W: 18.5
H: 39.75
Bubbler Style Flexi-Guard ® Safety Bubbler
Mounting Option Wall Mount (On Wall)
Chilling Option 8.0 GPH
Installation Location Indoor
Number of Stations Serving 1
Shipping Dimensions L: 24
W: 28.7
H: 26.2
Approximate Shipping Weight (lbs) 91 lbs.
Includes: Water Cooler (EMABF8WSS), Bottle Filler (EZWSR)
Made or Assembled USA built
Family EMAB Family
ADA Compliance YES
Code Compliance Drinking Water ADA & ICC A117.1
ASME A112.19.3/CSA B45.4
Buy American Act
CAN/CSA C22.2 No. 120
GreenSpec
NSF 61
NSF 372 (lead free)
UL 399
Weight 91 lbs.
N/A
N/A
Reviews
Rated 1 out of 5 by from Operation is fine but electronics are poor I purchased 1 of these for the break room of my business to replace a dedicated water cooler (I already had the drinking fountain) and had it installed in April 2019. I am now purchasing PN 98543C, which is all of the electronics for the unit which costs almost 1/2 of what the bottle filler costs in the first place. My plumber says the control board is getting power, but the not sending power to the sensor or releasing water, and the control board is not available individually, it is part of the complete electronics package. I had not yet reached 10,000 bottles saved on the counter on the unit. It was an unfortunate time for it to die as right now I am not supposed to have the fountain portion accessible due to COVID. If I were to do it again, I would get a bar faucet and plumb it into the chilled line of the fountain, like I did on my fully stainless fountains that Elkay did not make bottle fillers for (photo attached). I would lose the bragging rights of how many bottles I've saved and no-contact, but gain reliability. Between service calls, installation, and parts, I did not come out ahead compared to what a water service was costing me, nor do I have the convenience of disposable bottles.
Date published: 2020-08-25
  • y_2020, m_9, d_24, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_EMABF8WSSK, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_elkay
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 9.08ms
  • REVIEWS, PRODUCT
Questions

We have Elkay Model #ERFP2 8C C water fountains in our cafeteria (school district). Do you have a Retrofit Bottler for this fountain?

Asked by: Saints
Thank you for your question on the EMABF8WSLK. The LZWS-ERPB8-RF would be the retrofit need for our ERFP models. However, please note that this would remove one arm of the bi-level and may reduce ADA and plumbing code compliance.
Answered by: Elkay_Expert
Date published: 2020-08-03

Is there a U tube version to show how to install a LZWSRKX retro kit to an existing EZ *?

Asked by: Bill C
Thank you for your question on the EMABFWS-RF. I have included the link below for adding and EZ model retrofit bottle filler which will help you install the LZWSR retrofit. If you are looking at installing the EMA version, it will vary slightly due to differences in the basin, lower cover, & water activation. You can also find this video on our online help center at helpcenter.elkay.com. Choose the Drinking Water Products, scroll down to Repair and Maintenance Support, choose Installation Help, and it will be the link for Adding a Bottle Filler. https://www.youtube.com/watch?v=GNqkErbbAcQ&list=PLJ1d3m0iNHrRHfbJZzyDiUol6kopEQ7ZG&index=5&t=0s
Answered by: Elkay_Expert
Date published: 2020-08-01

Will this fit on model number EBFATL8 1D? I had received retro fit LZWSRK and they are not compatible from what i can tell. Thank you in advance for your input.

Asked by: Gregory
Thank you for your question on the Unfortunately, we do not have a retrofit available. Your EBFATL8 1D is an older unit and the basin for this model is longer than our current production model will work with. However, if you would like to order a bottle filling station unit to replace your current cooler only model, you can contact our friendly Customer Care team and they will be able to assist you further in which model to order that best suits your needs. They can be reached at: 800-476-4106 or Email: CustCare@Elkay.com.
Answered by: Elkay_Expert
Date published: 2020-07-31

Will the LMABFWS-RF Elkay EZH2O RetroFit Bottle Filling Station Kit, Filtered Non-Refrigerated fit on a LZFS8 1C and a VRCTLB 1, I have both.

Asked by: Davelee
Thank you for your question on the LMABFWS-RF. You would actually want to use the LZWSRK retrofit bottle filling stations for your LZF model number. A retrofit model is available for the VRC as a special order. Please contact our friendly Customer Care team and they will be able to assist you further. They can be reached at: 800-476-4106 or Email: CustCare@Elkay.com.
Answered by: Elkay_Expert
Date published: 2020-07-31

Do you have a retro fit bottle filling station that eliminates the bubbler?

Asked by: Kaiser
Thank you for your question on the LMABFWS-RF. Elkay does not offer retrofit units that that would eliminate the bubbler. However, if you already have a bottle filling station or once a retrofit bottle filler has been installed, we have put together a quick how-to for disconnecting the bubbler portion of your Bottle Filling Station to allow you to be able to continue to use the bottle filler. Please visit our online HelpCenter at the link below for the article on this. If you have any further questions or need assistance with this, please contact our Tech Services and they will be happy to help. They can be reached at: 800-260-6640 and select Option 3. Please call while you are at the unit in question as our Tech Services representative may have questions in order to help you properly. https://helpcenter.elkay.com/hc/en-us/articles/360049989834-How-to-Bypass-the-Bubbler-on-a-Bottle-Filling-Station
Answered by: Elkay_Expert
Date published: 2020-07-31

hi i would like to know why the bottel filler slowed down water presser checked sreen in areator is ok

Asked by: CLIFF
Thank you for your question on the EMABFTL8WSLK. I have included a link to our virtual help center where you could try one of our troubleshooting guides for "Water Stream is Too Low" or "No Water Flow" to help solve your issue. Or please feel free to contact our Tech Services and they will be happy to help. They can be reached at: 800-260-6640 and select Option 3. Please call while you are at the unit in question as our Tech Services representative may have questions in order to help you properly. https://helpcenter.elkay.com/hc/en-us/sections/360000408713-Troubleshooting-Guides-General-
Answered by: Elkay_Expert
Date published: 2020-07-29

Is there a retro fit available for EZFSTL8?

Asked by: Scuizi
Thank you for your question on the EMABFWS-RF. You would actually want to use the LZWSRK retrofit bottle filling stations for the EZFSTL8 model number.
Answered by: Elkay_Expert
Date published: 2020-07-22

do these pre-assembled ?

Asked by: arod44
Thank you for your question on the EMABF8WSLK. This model does not come preassembled and is shipped in multiple boxes (one for the cooler and one for the bottle filler).
Answered by: Elkay_Expert
Date published: 2020-07-10

We are preparing to update our existing water fountains with Elkay bottle filling stations. Our Elkay model number is EZFS8 1B. Is there a retrofit available?

Asked by: Wegs
Thank you for your question on the EMABFWS-RF. You would actually want to use the LZWSRK retrofit bottle filling stations for your EZF model number.
Answered by: Elkay_Expert
Date published: 2020-07-20

We have multiple Elkay drinking fountains and I am wondering if there is a retrofit kit for them EBFATL8 1D EBFSA-F-1A EZF8_1E EZFS8-1G EHFA-8-1A EZFS8-1D EZFSTLB_1H EZFS8-1G EZF8 1D EZFSTL8 1B

Asked by: MechTech12
Thank you for your question on the LMABFWS-RF. You would actually want to use the LZWSRK retrofit bottle filling stations for the model numbers that start with EZF. Unfortunately, for the EBF and EHF models there is not a retrofit bottle filling station available due to their age and design. If you would like to replace the EBF and EHF models with a bottle filling station and fountain combination, please contact our friendly Customer Care team and they will be able to assist you further in which models to order as replacements. They can be reached at: 800-476-4106 or Email: CustCare@Elkay.com.
Answered by: Elkay_Expert
Date published: 2020-07-16

we have one unit that has a rubber base drain, can a retro fit unit replace this or do i need a whole new unit

Asked by: Brucem
Thank you for your question on the LMABF8WSSK. Per the installation instructions for this model, it looks like there is a drain kit available. The instructions are calling that drain kit model number as 1000001889. Please contact our friendly Customer Care team and they will be able to assist you further in ordering the replacement. They can be reached at: 800-476-4106 or Email: CustCare@Elkay.com.
Answered by: Elkay_Expert
Date published: 2020-06-24

can you install without the bubbler?

Asked by: mud2fire
Thank you for your question on the LMABF8WSLK. Since the LMABF8WSLK comes with a bubbler as part of the unit you would need to install it. However, we have put together a quick how-to for disconnecting the bubbler portion of your Bottle Filling Station to allow you to be able to use the bottle filler only. Please visit our online HelpCenter at the link below for the article on this. If you have any further questions or need assistance with this, please contact our Tech Services and they will be happy to help. They can be reached at: 800-260-6640 and select Option 3. Please call while you are at the unit in question as our Tech Services representative may have questions in order to help you properly. https://helpcenter.elkay.com/hc/en-us/articles/360049989834-How-to-Bypass-the-Bubbler-on-a-Bottle-Filling-Station
Answered by: Elkay_Expert
Date published: 2020-07-16

Exactly is the location of the electrical out let on the wall for bottlefill units

Asked by: Brucem
Thank you for your questions on the LMABF8WSSK. The electrical plug is located on the back of this unit. Page 3 of our installation instructions show approximately how high the unit should be installed above the floor to align with the wall outlet, which should be 21-3/8". Please visit the link below to go directly to the PDF of our installation instruction. http://www.elkayfiles.com/care-cleaning-install-warranty-sheets/1000001717.pdf
Answered by: Elkay_Expert
Date published: 2020-06-23

can you isolate the bubbler so only the bottle fill works?

Asked by: Brucem
Thank you for your question on the LMABF8WSSK. We have put together a quick how-to for disconnecting the bubbler portion of your Bottle Filling Station to allow you to be able to continue to use the bottle filler. Please visit our online HelpCenter at the link below for the article on this. If you have any further questions or need assistance with this, please contact our Tech Services and they will be happy to help. They can be reached at: 800-260-6640 and select Option 3. Please call while you are at the unit in question as our Tech Services representative may have questions in order to help you properly. https://helpcenter.elkay.com/hc/en-us/articles/360049989834-How-to-Bypass-the-Bubbler-on-a-Bottle-Filling-Station"
Answered by: Elkay_Expert
Date published: 2020-06-23

During COVID-19 can you shut off the fountain and only use the Bottle Filling Station?

Asked by: Billmac
Thank you for your question on the EMABF8WSLK. Elkay can help you navigate the ongoing Covid-19 response requirements, so you can continue to provide healthy drinking water. We have put together a quick how-to for disconnecting the bubbler portion of your Bottle Filling Station to allow you to be able to continue to use the bottle filler. Please visit our online HelpCenter at the link below for the article on this. If you have any further questions or need assistance with this, please contact our Tech Services and they will be happy to help. They can be reached at: 800-260-6640 and select Option 3. Please call while you are at the unit in question as our Tech Services representative may have questions in order to help you properly. https://helpcenter.elkay.com/hc/en-us/articles/360049989834-How-to-Bypass-the-Bubbler-on-a-Bottle-Filling-Station
Answered by: Elkay_Expert
Date published: 2020-06-23

We have a number of ELKAY model# EBF ATLD 1-A fountains in our school. Will this retrofit system work on our fountain

Asked by: Rhodsy
Thank you for your question on the EMABFWS-RF. Unfortunately, your EBFAT models are an obsolete model and no retrofit bottler filler model is available. That EBFAT model does have a replacement model that does come with an bottle filling station that comes in either a filtered or non-filtered option. The replacement filtered model number is LZSTL8WSLK and the non-filtered replacement model number is EZSTL8WSLK. Both of these models are available on Elkay.com for you to review and download any specifications needed.
Answered by: Elkay_Expert
Date published: 2020-06-19

does the LMABF8WSSK come as a hi low specification item?

Asked by: Anonymous
Thank you for your question on the LMABF8WSSK. It does come in a bi level (hi low) version. That model is LMABFTL8WSSK and is available on Elkay.com for you to review and download any specifications needed.
Answered by: Elkay_Expert
Date published: 2020-06-19

I need this model with the drain on the right side. How can I check?

Asked by: post office
Hello Post Office - We would love to help you with this! Please contact our customer care team for assistance. They can be reached at Phone: 800-476-4106 or Email: CustCare@Elkay.com. Thank you for your question!
Answered by: ElkayExpert
Date published: 2020-06-01

Does this come in a model with the right side high instead of the left side high?

Asked by: Stan
Hello Anonymous - We would love to help you find the perfect unit! Please contact our customer care team for assistance. They can be reached at Phone: 800-476-4106 or Email: CustCare@Elkay.com. Thank you for your question!
Answered by: ElkayExpert
Date published: 2020-05-13

I need a operator manual and parts list for my LZWSR_1C ser# 171030230

Asked by: Green
Hello Anonymous - We would love to help with this! Please contact our customer care team for assistance. They can be reached at Phone: 800-476-4106 or Email: CustCare@Elkay.com. Thank you for your question!
Answered by: ElkayExpert
Date published: 2020-04-14

Can you add a filter to this unit? Thank you!

Asked by: tammy
Hello Tammy - Yes, you can add a filter to this unit with part number EWF3000. Thank you for your question!
Answered by: ElkayExpert
Date published: 2020-04-13

Do you have a stainless steel back panel model to recommend to protect the wall at the lower fountain for this particular model?

Asked by: elise_s
Hello Elise - Since this is a wall mount unit, there is not an additional back panel. If you have any other questions, please contact our customer care team for assistance. They can be reached at Phone: 800-476-4106 or Email: CustCare@Elkay.com. Thank you for your question!
Answered by: ElkayExpert
Date published: 2020-03-30

Not sure I am finding capatibility with the ELKAY EMABFWS-RF and my model number EZFS8_1F. Will they work together? Thank you!

Asked by: Francie
Hello Francie - We would be happy to assist you with this. Please contact our friendly Customer Care department who will be happy to assist you further. They can be reached at Phone: 800-476-4106 or Email: CustCare@Elkay.com. Thank you for your question!
Answered by: ElkayExpert
Date published: 2020-03-12

Do you know the approximate life span of this product if it is indoors and well maintained?

Asked by: Brazosport
Hello Brazosport - We would love to help you with this! Please reach out to our customer care team for assistance. They can be reached at Phone: 800-476-4106 or Email: CustCare@Elkay.com. Thank you for your question!
Answered by: ElkayExpert
Date published: 2020-03-12

does the drinking fountain chill the water for the bottle filler

Asked by: plumberjeff31
Hello! This is a non-refrigerated unit. We would love to help you find the perfect bottle filler! Please reach out to our customer care team for assistance. They can be reached at Phone: 800-476-4106 or Email: CustCare@Elkay.com. Thank you for your question!
Answered by: ElkayExpert
Date published: 2020-03-12

Does this work with model EZFSTL8_1c? If not, then is there a filtered unit that does?

Asked by: JayP
Hello Jay P - LZWSRK is a retro fit kit for EZFSTL8_1c. Thank you for your question!
Answered by: ElkayExpert
Date published: 2020-06-17

When I fill up my extra large water bottle, the water automatically stops after a certain point. How much water does the bottle filler dispense before automatically shutting off?

Asked by: teacher631
Hello Teacher631 - This unit has an automatic 20-second shut-off timer. Thank you for your question!
Answered by: ElkayExpert
Date published: 2020-03-12

What are the three status's of the filter status light. Green I assume is good, Red must be replace filter, what is yellow? Is the light based on time or gallons of water dispensed?

Asked by: Paul54
Hello Anonymous - The visual filter monitor with LED filter status indicator for when filter change is necessary. Yellow indicates it is soon time to replace the filter. It should be replaced every 3,000 gallons or 1 year after installation.If you have any further questions please feel free to contact our customer care team who will be happy to help you. They can be reached at Phone: 800-476-4106 or Email: CustCare@Elkay.com. Thank you for your question!
Answered by: ElkayExpert
Date published: 2020-03-12

Does elkay make a skirt for high unit at 27” per A.D.A. code 307.2?

Asked by: Kevin34
Hello Kevin34 - 98324C is the optional apron for LMABFTL8WSSK. For questions about ADA, please visit: https://www.ada.gov/2010ADAstandards_index.htm or contact our customer care team. They can be reached at Phone: 800-476-4106 or Email: CustCare@Elkay.com. Thank you for your question!
Answered by: ElkayExpert
Date published: 2020-03-12

The compressor location is the compressor located in lower fixture as in most other models?

Asked by: Kevin34
Hello - Yes, the compressor is located on the right side. Thank you for your question!
Answered by: ElkayExpert
Date published: 2020-03-31
  • y_2020, m_9, d_24, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_40
  • loc_en_US, sid_EMABF8WSSK, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_elkay
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 62.35ms
  • QUESTIONS, PRODUCT