ECTRUD31199R
Elkay Crosstown 18 Gauge Stainless Steel 32-1/2" x 20-1/2" x 9", 60/40 Double Bowl Undermount Sink with Right Water Deck
List Price
$648.00
Elkay Crosstown 18 Gauge Stainless Steel 32-1/2" x 20-1/2" x 9", 60/40 Double Bowl Undermount Sink with Right Water Deck is rated
out of
5 by
1.
Product Description
N/A
| Material | Stainless Steel |
|---|---|
| Installation Type | Undermount |
| Features | Water Deck |
| Gauge | 18 Gauge |
| Sound Deadening | Full spray sides and bottom with Sides and Bottom pads |
| Number of Bowls | 2 |
| Minimum Cabinet Size | 36" |
| Dimensions | L: 32-1/2" W: 20-1/2" H: 9" |
| Bowl One Dimensions | L: 16" W: 19" D: 9" |
| Bowl Two Dimensions | L: 14" W: 16" D: 9" |
| Drain Size | 3-1/2" |
| Drain Size 2 | 3-1/2" |
| Shipping Dimensions | L: 40" W: 27-9/16" H: 10-13/16" |
| Approximate Shipping Weight (lbs) | 38 lbs. |
| Family | Crosstown |
| ADA Compliance | NO |
| Code Compliance Sinks | ASME A112.19.3/CSA B45.4 |
| Weight | 38 lbs. |
N/A
Reviews
Rated 5 out of
5
by
Lynn S from
I'm Loving This Sink!
I wanted to wait until I had this installed for a while before writing a review. It's been in for a couple of months and I have to say I love it! I haven't had a stainless steel sink since the 70's and they've come a long way. Do yourself a favor and order the bottom sink grates for each side. Stainless will still scratch, but so far after 2 months of everyday use, it's still scratch free, due largely in part to those bottom grates. I also drape my dish cloth over the center divider if I'm scrubbing a large pot or something. So far, it's only needed the occasional wash down with a soapy sponge to keep it looking brand new. We also don't have hard water where I live, so that helps a lot. The water deck is great for keeping all water inside the sink that wet hands etc, tend to otherwise track outside the sink. This one is a beauty and it's not tinny sounding either. Very good quality! One last note: Be sure your slab fabricator follows the template provided with the sink. Our fabricator said quote "we never use the template, we just do a standard 1/4" overlap edge". Elkay recommends 1/8" and I can see why. The 1/4" I have cuts into the space on the water deck, making the faucet and corner soap dispenser install very tight. Hold your ground on this one!
Date published: 2021-04-06
Questions
Is it possible to add a hole to the ECTRUD31199RS2, say if I wanted to add one in between the two holes?
Thank you for your question on the Elkay ECTRUD31199RS2 Crosstown 18 Gauge Stainless Steel S2-Hole 60/40 Double Bowl Undermount Sink with Water Deck. We do not recommend cutting additional holes as it will void the warranty. You could also contact our Custom Stainless Solutions department and they'll be happy to help you with a custom sink solution. They can be reached at: 630-574-8570 or CIS@elkay.com.
Date published: 2021-09-11
How can a 151/2 bottom grid fit in to a 15 inch sink? CTXBG1515 shows this fits into the EDTRU32179LT. Also, is there a strainer to fit into this sink?
Thank you for your question on the Elkay ECTRU32179LT Crosstown 18 Gauge Stainless Steel 40/60 Double Bowl Undermount Sink. The Elkay CTXBG1515 Crosstown Stainless Steel Bottom Grid is 15-1/2" x 15-1/2" and designed to fit the larger bowl which is 17" x 17". The Elkay CTXBG1015 Crosstown Stainless Steel Bottom Grid is 10-1/2"x 15-1/2" and designed to fit the smaller bowl which is 12" x 17". For drains, we recommend either the Elkay LK35 3-1/2" Drain Fitting Type 304 Stainless Steel Body Strainer Basket and Tailpiece or the Elkay LKDD 3-1/2" Drain Fitting Deep Strainer Basket.
Date published: 2021-07-19
Can this sink be used outdoors?
Thank you for your question on the Elkay ECTRU31179T Crosstown 18 Gauge Stainless Steel Equal Double Bowl Undermount Sink. While we recommend sinks be made of type 316 stainless steel, this model could be used as an outdoor sink as it is made of type 304 stainless steel.
Date published: 2021-05-12
Where is the Crosstown ECTRUD31199LS2 sink made? I prefer USA made products.
Thank you for your question on the ECTRUD31199LS2. This sink model is made in China.
Date published: 2020-08-18
I am looking for the 2 hold SPREAD on the water deck, does this come in the option of the smaller sink on left? I am only seeing the regular 2 hole option.
Hello JoanB - We would love to help you find the perfect sink! Please reach out to our customer care team for assistance. They can be reached at Phone: 800-476-4106 or Email: CustCare@Elkay.com. Thank you for your question!
Date published: 2020-02-11
What is the part number for the grids that will fit this sink?
Hello - The recommended bottom grids for this sink are GFOBG1619SS and GFOBG1416SS. If you have any further questions please feel free to contact our customer care team who will be happy to help you. They can be reached at Phone: 800-476-4106 or Email: CustCare@Elkay.com. Thank you for your question!
Date published: 2020-11-11
I purchased a ECTRUD31199R0, 32.5" x 20.5 " x9 ", 18 gauge. We opened the box to find there is no hole. Can I exchange for exact sink with a hole?
Hello Ginny - Please contact our Customer Care department for assistance. They can be reached at Phone: 800-476-4106 or Email: CustCare@Elkay.com. Thank you for your question!
Date published: 2019-04-24
What makes the difference in cost between the RCTRUD31199RS2 and ECRUD31199R? Also are these sinks available in 16 gauge and at what cost?
Hello Scruffy2 - The difference between ECTRUD31199RS2 and ECTRUD31199R is the number of faucet holes and only available in 18 gauge. Thank you for your question!
Date published: 2019-01-02