Image may not reflect selected options.
Dayton Stainless Steel 15" x 15" x 5-3/16", 2-Hole Single Bowl Drop-in Bar Sink with 2" Drain Opening (10 Pack)
|Sound Deadening||Bottom only pads|
|Number of Bowls||1|
|Minimum Cabinet Size||18"|
|Bowl One Dimensions||L: 12"
|Shipping Dimensions||L: 27-1/2"
|Approximate Shipping Weight (lbs)||4.5 lbs.|
|Made or Assembled USA||made|
|Code Compliance Sinks||ADA & ICC A117.1
ASME A112.19.3/CSA B45.4
BUY AMERICAN ACT
it says min cabinet size 21".. im guessing that is the measurement from front to back. whats the measurement on with the width overall?
Thank you for your question on the Dayton D117191 Stainless Steel Single Bowl Drop-in Bar Sink. The 21" minimum cabinet size is for the left to right of the cabinet.
Date published: 2021-05-12
WHERE ARE THE MOST IMPORTANT DIMENSIONS: THE CUT OUT DIMENSIONS?
Thank you for your question on the D11515. The countertop cutout dimensions are 14-3/8" x 14-3/8" (365mm x 365mm) with 1-1/2" (38mm) corner radius. They are also located on our specification sheets, which can be found under the Downloads tab on the product page. I have included the link to the spec sheet below. http://www.elkayfiles.com/spec-sheets/d11515_spec.pdf
Date published: 2021-02-09
How wide apart are the two outermost holes on the D117193 sink?
Date published: 2020-07-11